钢渣有价组分的分部高附加值利用

doi:10.12034/j.issn.1009-606X.217124

过程工程学报 ›› 2017, Vol. 17 ›› Issue (5): 1028-1034.DOI: 10.12034/j.issn.1009-606X.217124

钢渣有价组分的分部高附加值利用

何延波¹，吴照金^1,2^*，高志芳¹，岳海峰²，刘伟明^1,2，王平^1,2

1. 安徽工业大学冶金减排与资源综合利用教育部重点实验室，安徽马鞍山 243002; 2. 安徽工业大学冶金工程与资源综合利用安徽省重点实验室，安徽马鞍山 243002

收稿日期:2017-02-06 修回日期:2017-03-24 出版日期:2017-10-20 发布日期:2017-10-10
通讯作者: 吴照金 wzjof@hotmail.com
基金资助:
CMASFX固废体系中有价金属的选择性析出及走向调控机制研究;含锌尘泥可控构筑多元掺杂α-Fe2O3@ZnFe2O4异质结光催化材料的基础研究;利用冶金含铁固废制备多元掺杂型Fe基载氧体的基础研究

Respective and High Value-added Utilization of the Valuable Components in BOF Steel Slag

Yanbo HE¹, Zhaojin WU^1,2?, Zhifang GAO^1,2, Haifeng YUE², Weiming LIU^1,2, Ping WANG^1,2

1. Key Laboratory of Metallurgical Emission Reduction & Resources Recycling (Anhui University of Technology), Ministry of Education, Maanshan, Anhui 243002, China; 2. Anhui Key Lab. Metall. Eng. Resources Recycling (Anhui University of Technology), Ma?anshan, Anhui 243002, China

Received:2017-02-06 Revised:2017-03-24 Online:2017-10-20 Published:2017-10-10

摘要/Abstract

摘要： 采用选择性碳热还原方法高附加值利用转炉钢渣中有价组分，实验考察了还原温度和时间对转炉钢渣中主要有价元素Fe, P, Mn, Cr等的还原行为及析出多元铁合金(目标相)成分的影响，通过磨矿、磁选分离得到目标相和余渣，以目标相为主要原料合成锂离子电池正极材料掺杂型磷酸铁锂. 结果表明，产物0.1C下首次放电容量达159.58 mA?h/g，倍率循环性能良好；余渣主要成分为Ca(OH)2, 2CaO?SiO2和3CaO?SiO2，平均粒径约2.5 ?m且分布均匀，资源特性和利用价值明显提升.

关键词: 转炉钢渣, 综合利用, 碳热还原, 磷酸铁锂

Abstract: A new method for respective and high value-added utilization of the valuable components in BOF steel slag was proposed. Using the selective carbothermic method, the reduction behavior of the valuable elements Fe, P, Mn, Cr etc in BOF steel slag and the composition of the ferroalloy (target phase) precipitated from the slag effected by reduction temperature and time were investigated. Target phase and residues were obtained from the reduced slag by milling and magnetic separation. The metals-doped LiFePO4/C, a cathode material of lithium ion battery was synthesized by using the target phase recovered from the slag as main raw material. The results showed that exhibiting first discharge capacity of 159.58 mA?h/g at 0.1C and excellent rate performance. The residue was fine powders with mean size of about 2.5 ?m and uniform size distribution, and its main phases include Ca(OH)2, 2CaO?SiO2 and 3CaO?SiO2, showing significantly improved resource characteristics and utilization value.

Key words: BOF steel slag, recycling, carbothermic reduction, LiFePO4

何延波吴照金高志芳岳海峰刘伟明王平. 钢渣有价组分的分部高附加值利用[J]. 过程工程学报, 2017, 17(5): 1028-1034.

Yanbo HE Zhaojin WU Zhifang GAO Haifeng YUE Weiming LIU Ping WANG. Respective and High Value-added Utilization of the Valuable Components in BOF Steel Slag[J]. Chin. J. Process Eng., 2017, 17(5): 1028-1034.

参考文献

参考文献
1. Tsakiridis P E, Papadimitriou G D, Tsivilis S, et, al. Utilization of Steel Slag for Portland Cement Clinker Production [J]. Journal of Hazardous Materials, 2008, 152(2): 805-811.
2. Chand S, Paul B, Kumar M. Sustainable Approaches for LD Slag Waste Management in Steel Industries: A review [J]. Metallurgist, 2016, 60(1-2): 116-128.
3. Piatak N M, Parsons M B, Seal II R R. Characteristics and Environmental Aspects of Slag: A Review. Applied Geochemistry, 2015, 57: 236-266.
4. 张朝晖, 廖杰龙, 巨建涛, 等. 钢渣处理工艺与国内外钢渣利用技术[J]. 钢铁研究学报, 2013, 25(7): 1-4.
5. Liu Q, Liu J X, Qi L Q. Effects of Temperature and Carbonation Curing on the Mechanical Properties of Steel Slag-Cement Binding Materials [J]. Construction and Building Materials, 2016, 124: 999-1006.
6. Wang Q, Yan P Y, Feng J W. A Discussion on Improving Hydration Activity of Steel Slag by Altering Its Mineral Compositions [J]. Journal of Hazardous Materials, 2011, 186(2-3): 1070–1075.
7. Sorlini S, Sanzeni A, Rondi L. Reuse of Steel Slag in Bituminous Paving Mixtures [J]. Journal of Hazardous Materials, 2012, 209-210: 84 - 91.
8. Chaurand P, Rose J, Briois V, et, al. Environmental Impacts of Steel Slag Reused in Road Construction: A Crystallographic and Molecular (XANES) Approach [J]. Journal of Hazardous Materials, 2007, B139(3): 537-542.
9. 李光强, 张峰, 张力, 等. 高温碳热还原进行转炉渣资源化的研究[J]. 材料与冶金学报, 2003, 2(3): 167-172.
10. Morita K, Guo M, Oka N, et, al. Resurrection of the Iron and Phosphorus Resource in Steel-Making Slag [J]. Journal of Material Cycles and Waste Management, 2002, 4(2): 93-101.
11. Ye G Z, Burstr?m E, Kuhn M, et, al. Reduction of Steel-Making Slags for Recovery of Valuable Metals and Oxide Materials [J]. Scandinavian Journal of Metallurgy, 2003, 32(1): 7–14.
12. Jung S M, Do Y J, Choi J H. Reduction Behaviour of BOF Type Slags by Solid Carbon [J]. Steel Research International, 2006, 77(5): 305-311.
13. Jung S M, Do Y J. Reduction Behaviour of BOF Slags by Carbon in Iron [J]. Steel Research International, 2006, 77(5): 312-316.
14. Yuan H, Wang XY, Wu Q. Effects of Ni and Mn Doping on Physicochemical and Electrochemical Performances of LiFePO4/C [J]. Journal of Alloys and Compounds, 2016, 675: 187-194.
15. Naik A, Zhou J, Gao C, et, al. Impact of Incorporation of Chromium on Electrochemical Properties of LiFePO4/C for Li-ion Batteries [J]. Materials Science-Poland, 2015, 33(4): 742-750.
16. Loveridge M J, Lain M J, Johnson I D, et al. Towards High Capacity Li-ion Batteries Based on Silicon-Graphene Composite Anodes and Sub-micron V-doped LiFePO4 Cathodes [J]. Scientific reports, 2016, 6: 37787.

[1]	李小明闻震宇李怡王伟安邢相栋. 碳酸钠对镍渣碳热还原的催化作用[J]. 过程工程学报, 2020, 20(2): 182-188.
[2]	王成彦曹志河马保中陈永强. 红土镍矿硝酸加压浸出工艺[J]. 过程工程学报, 2019, 19(S1): 51-57.
[3]	吴名涛邵大伟郭强李永利齐涛. 不锈钢酸洗废水钙钠中和沉淀与碳热还原协同处理新工艺[J]. 过程工程学报, 2019, 19(5): 989-996.
[4]	魏汝飞陈龙智龙红明王毅璠李家新李亚飞宣明. 铁矿烧结烟气半干法脱硫灰亚临界水热非均相氧化[J]. 过程工程学报, 2019, 19(3): 603-608.
[5]	孔玮佳于守泉戈敏张伟刚杜令忠. 碳化锆陶瓷有机前驱体的热解过程[J]. 过程工程学报, 2019, 19(3): 623-630.
[6]	李崇周俊刘瑶周志茂. 我国废硫酸产生及综合利用现状[J]. 过程工程学报, 2018, 18(S1): 24-34.
[7]	王凯飞张国华王璐周国治. 添加Fe₂O₃对碳热还原含钛高炉渣的影响[J]. 过程工程学报, 2018, 18(6): 1276-1282.
[8]	王安仁袁吉峰. 氮化钒制备热力学和动力学[J]. 过程工程学报, 2017, 17(3): 558-564.
[9]	李慧龙萍任新林陈秀敏杨斌. 复杂锡精矿还原熔炼过程中元素在金属和渣相中的分布[J]. 过程工程学报, 2016, 16(1): 132-137.
[10]	李磊廖彬王华胡建杭邱在军桑秀丽. 锡铁矿硫化焙烧脱锡[J]. , 2013, 13(3): 409-414.
[11]	杨勇李解李保卫张邦文韩继铖. 铌酸铁碳热还原的等温动力学分析[J]. , 2013, 13(3): 430-435.
[12]	赵凯程相利齐渊洪甄常亮师学峰. 水淬铜渣的矿物学特征及其铁硅分离[J]. , 2012, 12(1): 38-43.
[13]	余德麒施正伦肖文丁李戈跃骆仲泱岑可法. 石煤灰渣二次焙烧稀酸浸出提钒工艺条件[J]. , 2010, 10(4): 673-678.
[14]	熊利芝陈启元尹周澜张平民. 真空碳热还原氧化锌矿动力学[J]. , 2010, 10(1): 133-137.
[15]	张淑会康志强吕庆薛向欣黄大威. 利用铁尾矿合成Si3N4粉[J]. , 2008, 8(6): 1153-1157.

钢渣有价组分的分部高附加值利用

Respective and High Value-added Utilization of the Valuable Components in BOF Steel Slag

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics