欢迎访问过程工程学报, 今天是

过程工程学报 ›› 2021, Vol. 21 ›› Issue (10): 1156-1166.DOI: 10.12034/j.issn.1009-606X.220368

• 综述 • 上一篇    下一篇

大孔拟薄水铝石和γ-Al2O3载体制备研究进展

杨永佳1,2, 张新昇4, 李金1, 张春光1*, 赵元生1, 郑诗礼2, 李平2,3*
  

  1. 1. 中国石油天然气股份有限公司石油化工研究院,北京 102206

    2. 中国科学院过程工程研究所湿法冶金清洁生产技术国家工程实验室,北京 100190

    3. 中国科学院赣江创新研究院,江西 赣州 341004

    4. 中国石油天然气股份有限公司大连石化分公司,辽宁 大连 116032

  • 收稿日期:2020-11-13 修回日期:2021-01-20 出版日期:2021-10-28 发布日期:2021-10-26
  • 通讯作者: 张春光 zhangchunguang010@petrochina.com.cn
  • 基金资助:
    国家自然科学基金资助项目;中国石油天然气股份有限公司资助项目

Research progress in preparation of large pore pseudoboehmite and γ-Al2O3 carrier

Yongjia YANG1,2,  Xinsheng ZHANG4,  Jin LI1,  Chunguang ZHANG1*,  Yuansheng ZHAO1,  #br# Shili ZHENG2,  Ping LI2,3*   

  1. 1. CNPC Petrochemical Research Institute, Beijing 102206, China

    2. National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China

    3. Ganjiang Innovation Academy, Chinese Academy of Sciences, Ganzhou, Jiangxi 341004, China

    4. CNPC Dalian Petrochemical Company, Dalian, Liaoning 116032, China

  • Received:2020-11-13 Revised:2021-01-20 Online:2021-10-28 Published:2021-10-26
  • Contact: chunguang guangZhang zhangchunguang010@petrochina.com.cn

摘要: γ-Al2O3作为催化剂载体在炼油领域具有广泛应用。随着原油资源的重、劣质化,重油加工过程,如固定床渣油加氢、重油催化裂化,对其催化剂载体均提出了大孔要求以满足重油大分子在催化剂孔道内的传质扩散所需,因此,制备适用于重油加工的大孔γ?Al2O3载体受到越来越多的关注。γ?Al2O3性质主要决定于其前驱物拟薄水铝石,本工作综述了大孔拟薄水铝石的主要工业制备工艺,包括沉淀法、醇铝水解法等,并介绍了基于上述工艺所进行的γ?Al2O3载体扩孔研究,如pH摆动扩孔、添加扩孔剂扩孔及水热处理扩孔等。最后,展望了今后大孔拟薄水铝石和γ?Al2O3载体制备研究的重点和发展方向。

关键词: 拟薄水铝石, γ-Al2O3, 大孔, 制备方法, 扩孔

Abstract: γ?Al2O3 is widely used as catalyst carrier in petroleum processing realm, owing to its porosity, high dispersibility, adjustable surface acid/base characteristics, attractive mechanical properties and good thermal stability. As the quality of crude oil is increasingly heavy and inferior, more and more attention has been paid on the preparation of macro-mesostructured γ?Al2O3 since the γ?Al2O3 as the catalysts carrier, that used in the heavy oil processing, such as fixed-bed residue hydrotreating or RFCC, need more meso-and macroporous structures to reduce the internal diffusion resistance of large molecules and improve the catalytic activity. Commonly, pseudoboehmite as the raw materials turns decisive significance for the physiochemical properties of γ?Al2O3. For instance, the pore properties of γ?Al2O3 are greatly in?uenced by the size and morphology of pseudoboehmite crystallites and their aggregation. This manuscript thus reviewed the representative preparation methods of pseudoboehmite including precipitation method and aluminium alkoxide hydrolysis method. The advances of Al2(SO4)3?NaAlO2 method and carbonization method, as two main industrial technologies, were emphatically introduced. New reactors and technologies for the precipitation were developed in order to provide su?cient mixing intensity and recirculation of different reactants, which could bring about a homogeneous supersaturation distribution in the instantaneous neutralization reaction, and then lead to uniform crystallites size, thereby pseudoboehmite with large pore volume and narrow pore size distribution. Besides, the relative meso??and macroporous structures control technologies were also highlighted, such as pH swing method, pore-enlarging additives method, and hydrothermal treatment method, etc. The advantages and disadvantages of these methods were also briefly analyzed. At last, the development trend was introduced and some suggestions were proposed.

Key words: pseudoboehmite, γ-Al2O3, large pore, preparation method, pore expanding