欢迎访问过程工程学报, 今天是

›› 2009, Vol. 9 ›› Issue (6): 1237-1241.

• 材料工程专栏 • 上一篇    下一篇

SiO2纳米粒子改性填充PC的力学与流变性能

王平 赵建青 蒋智杰 刘运春 刘述梅   

  1. 华南理工大学材料科学与工程学院 华南理工大学材料科学与工程学院 华南理工大学材料科学与工程学院 华南理工大学材料科学与工程学院 华南理工大学材料科学与工程学院
  • 收稿日期:2009-06-05 修回日期:2009-09-29 出版日期:2009-12-20 发布日期:2009-12-20
  • 通讯作者: 王平

Mechanical and Rheological Properties of PC Composite Filled with Modified SiO2 Nanoparticles

WANGPing ZHAO Jian-qing JIANG Zhi-jie LIU Yun-chun LIU Shu-mei   

  1. Sch. Mater. Sci. & Eng,South China Univ. of Technol. Sch. Mater. Sci. & Eng,South China Univ. of Technol. Sch. Mater. Sci. & Eng,South China Univ. of Technol. Sch. Mater. Sci. & Eng,South China Univ. of Technol. Sch. Mater. Sci. & Eng,South China Univ. of Technol.
  • Received:2009-06-05 Revised:2009-09-29 Online:2009-12-20 Published:2009-12-20
  • Contact: WANGPing

摘要: 采用SiO2纳米粒子填充改性聚碳酸酯(PC),为使无机纳米粒子在基体PC中分散均匀,经硅烷偶联剂KH-550对SiO2纳米粒子进行表面处理,分析了改性SiO2纳米粒子对复合材料机械与加工性能的影响,并对复合材料进行了分析表征,探讨了无机刚性纳米粒子填充改性典型工程塑料PC的特点并探索其增强增韧的机理,研究了复合物的粘流变性能. 结果表明,改性SiO2纳米粒为球形,在PC基体中分散均匀,湿法改性制备的PC/SiO2纳米粒子复合材料的力学拉伸性能和流变性能最好.

关键词: SiO2, 聚碳酸酯, 表面改性, 力学性能, 流变性能

Abstract: Modified SiO2 nanoparticles were filled into polycarbonate (PC) by two different methods. In order to enable the inorganic nanoparticles dispersed evenly in the PC matrix, the silane coupling agent KH-550 was used to modify the surface of SiO2 nanoparticles by wet treatment. The relationships between mechanical and processing properties of PC/SiO2 composite and silica content were examined, and product performance characterized. The characteristics of rigid modified inorganic nanoparticles filled on a typical engineering plastic PC were also studied to explore the mechanism of its strength enhancement and the rheological properties of PC/SiO2 composite. The results show that the modified SiO2 spheres had uniform dispersion in PC matrix and PC/SiO2 composite had good tensile strength and rheological effect.

Key words: SiO2, polycarbonate, surface modification, mechanical performance, rheological property

中图分类号: