欢迎访问过程工程学报, 今天是

过程工程学报 ›› 2015, Vol. 15 ›› Issue (4): 594-598.DOI: 10.12034/j.issn.1009-606X.215041

• 反应与分离 • 上一篇    下一篇

活性炭吸附提取氰化亚金离子的数学模拟

杨中山 刘庭耀 王宝 韩丽辉 刘青   

  1. 北京科技大学钢铁冶金新技术国家重点实验室 北京科技大学钢铁冶金新技术国家重点实验室 北京科技大学钢铁冶金新技术国家重点实验室 北京科技大学钢铁冶金新技术国家重点实验室
  • 收稿日期:2015-08-06 修回日期:1900-01-01 出版日期:2015-08-20 发布日期:2015-08-20
  • 通讯作者: 刘青

Mathematical Simulation on Adsorption of Aurous Cyanide Ion with Activated Carbon

YANG Zhong-shan LIU Yao-ting WANG Bao HAN Li-hui LIU Qing   

  1. State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing
  • Received:2015-08-06 Revised:1900-01-01 Online:2015-08-20 Published:2015-08-20
  • Contact: LIU Qing

PDF

摘要： 以含金工业废水的处理装置为研究对象及镍离子代替氰化亚金离子，对Φ0.2 m×0.5 m吸附柱中活性炭吸附氰化亚金离子进行数学模拟，得到不同条件下氰化亚金离子的吸附柱穿透曲线和吸附负荷分布曲线. 结果表明，当氰化亚金离子的进料流量为0.001 m3/s，进料浓度为 7.614′10-5 kmol/m3，传质系数为0.001 s-1时，吸附床层开始穿透时间为47.61 h，完全被穿透时间为124.14 h；增大进料流量和进料浓度可提高床层被穿透的速度，而当传质系数≥0.001 s-1时，氰化亚金离子吸附穿透曲线不再随传质系数增大而变化.

关键词: 活性炭, 吸附柱, 氰化亚金离子, 穿透曲线, 模拟

Abstract: Adsorption of aurous cyanide ion in gold-bearing industrial wastewater on activated carbon in a Φ0.2 m′0.5 m adsorption column was simulated by replacing aurous cyanide ion with nickel ion, and the breakthrough curves of aurous cyanide ion and adsorption capacity distribution under different conditions were obtained. The results show that at the feeding flow rate of 0.001 m3/s, feeding concentration of 7.614′10-5 kmol/m3 and mass transferring coefficient of 0.001 s-1, the beginning and completing adsorption breakthrough time of aurous cyanide ion absorbed by activated carbon was 47.61 h and 124.14 h, respectively. With increasing of the feeding flow rate and feed concentration, the breakthrough time was shortened. The adsorption breakthrough curves did not change with mass transferring coefficient any more when the value of mass transferring coefficient was over 0.001 s-1.

Key words: activated carbon, adsorption column, aurous cyanide ion, breakthrough curve, simulation

中图分类号: