欢迎访问过程工程学报, 今天是

›› 2001, Vol. 1 ›› Issue (3): 0-0.

• 3 •    

生化过程工程的特点和前沿

欧阳藩   

  1. .1 中国科学院化工冶金研究所生化工程国家重点实验室, 北京 100080; 2. 国家生化工程技术研究中心, 北京 100080
  • 出版日期:2001-06-20 发布日期:2001-06-20

Experiment of Optimizing Gas–Particle Flow Regime in the Square-section Circulating Suspension Bed

WANG Cui-ping, YANG Ye, LI Ding-kai, LU Zi-an   

  1. 1. State Key Lab. Biochem. Eng., Inst. Chem. Metall., CAS, Beijing 100080, China;2. National Engineering Research Center for Biotechnology, Beijing 100080, China
  • Online:2001-06-20 Published:2001-06-20

PDF

摘要： 生物技术工业与医药工业是过程工业，其工程科学与技术的研究属于过程工程学的研究范畴. 本文以生物医药(主要是基因工程药物)为例，讨论生化过程的一些特点和前沿. 对基因工程新药开发过程、药物生产过程进行了较详细的分析, 并对生化过程中研究的关键和前沿问题提出来探讨, 仅供参考.

关键词: 生物技术, 过程工程, 医药, 基因工程

Abstract: Both biotechnology industry and medicine industry are process industries. The research of their engineering and techniques belongs to the category of process engineering. This article discusses some characteristics and forward research topics of biochemiscal engineering process, taking biomedicine, especially medicine of gene engineering, as examples. New medicine developing process of gene engineering was thoroughly analyzed, and also the producing process of medicine. The key and forward problems in the research of the process were put forward for reference.

Key words: circulating suspension bed, air jet entrance structure, top hat-chamber, inner structure, working parameters

中图分类号: