欢迎访问过程工程学报, 今天是

›› 2010, Vol. 10 ›› Issue (1): 23-28.

• 流动与传递 • 上一篇    下一篇

脉冲射流取样装置性能的实验研究

刘斌斌 徐聪   

  1. 清华大学核能与新能源技术研究院 清华大学核能与新能源技术研究院
  • 收稿日期:2009-07-20 修回日期:2009-11-11 出版日期:2010-02-20 发布日期:2010-02-20
  • 通讯作者: 徐聪

Experimental Study on the Performance of a Pulsed Fluidic Sampler

LIU Bin-bin XU Cong   

  1. Institute of Nuclear and New Energy Technology, Tsinghua University Institute of Nuclear and New Energy Technology, Tsinghua University
  • Received:2009-07-20 Revised:2009-11-11 Online:2010-02-20 Published:2010-02-20
  • Contact: XU Cong

PDF

被引次数

1

摘要： 研究了一种无机械可动部件、可免维修的脉冲射流取样装置，以甘油-水体系为模拟对象，考察了体系粘度、压冲压力、T型节截面积和降液管长度对其取样性能的影响. 结果表明，随体系粘度从1.21 mPa×s增大到7.38 mPa×s，单次采样量从14.6 mL减小到6.1 mL；随T型节截面积增大单次采样量增大，并随体系粘度变大增大趋势更加显著；当降液管长度从2.65 m减至0.684 m时，单次采样量从19 mL锐减至3.8 mL，压冲压力对采样量几乎没有影响. 降液管中流体不连续流动导致的取样针底部出口处压力显著降低是采样驱动力的来源.

关键词: 取样器, 射流, 采样量, T型节

Abstract: A pulsed fluidic sampler without moving mechanical components with little maintenance was studied using glycerol-water system as working liquid. The effects of viscosity, static pressure, T-section cross-sectional area and down comer length on sampling performance of the sampler were investigated. The results indicated that the sampling quantity was reduced with increase of system viscosity from 14.6 to 6.1 mL, increased with increase of T-section cross-sectional area and more significant increasing trend with increase of system viscosity, and significantly reduced from 19 to 3.8 mL when the down comer length was reduced from 2.65 to 0.684 m. The effect of static pressure on the sampling quantity was very small. The source of sampling driving force was significant reduction of pressure in sampling needle tip, which was caused by the discontinuous flow fluid in the down comer.

Key words: sampler, jet fluid, sampling quantity, T-section

中图分类号: