欢迎访问过程工程学报, 今天是

›› 2014, Vol. 14 ›› Issue (6): 915-922.

• 反应与分离 • 上一篇    下一篇

铬盐无钙焙烧渣加压硫酸浸出

赵备备 王少娜 郑诗礼 杨得军   

  1. 中国矿业大学(北京)化学与环境工程学院 中国科学院过程工程研究所 中国科学院过程工程研究所 中冶京诚(秦皇岛)工程技术有限公司
  • 收稿日期:2014-08-28 修回日期:2014-10-31 出版日期:2014-12-20 发布日期:2014-12-20
  • 通讯作者: 赵备备

Pressure Leaching of Chromium-containing Slag from Non-calcium Roasting with Sulfuric Acid

ZHAO Bei-bei WANG Shao-na ZHENG Shi-li YANG De-jun   

  1. School of Chemical & Environmental Engineering, China University of Mining & Technology (Beijing) Institute of Process Engineering, Chinese Academy of Sciences Institute of Process Engineering, Chinese Academy of Sciences CERI Qinhuangdao Co.Ltd.
  • Received:2014-08-28 Revised:2014-10-31 Online:2014-12-20 Published:2014-12-20
  • Contact: ZHAO Bei-bei

摘要: 对铬盐无钙焙烧渣进行加压硫酸浸出,考察了硫酸浓度、反应温度、铬酸酐加入量、反应时间、铬渣粒度对铬渣硫酸浸出效果的影响. 结果表明,焙烧渣主要物相组成为:铬铁矿(FeCr2O4)和镁铁矿[Mg(Fe,Al)2O4]等尖晶石类矿物含量为73.11%,赤铁矿(a-氧化铁)为12.42%,钠霞石(NaAlSiO4)为10.02%. 铬高效溶出的最佳工艺条件为:硫酸浓度65%(w),反应温度120℃,铬酸酐加入量为铬渣质量的10%,反应时间2 h,搅拌转速500 r/min,该条件下溶出率可达97.93%. 尾渣以硅物相为主,SiO2含量为80.8%. 浸出过程符合收缩未反应核模型,反应表观活化能为16.38 kJ/mol,反应速率为外扩散和化学反应混合控制.

关键词: 铬盐, 物相, 硫酸, 浸出, 加压, 铬酸酐

Abstract: The pressure leaching process of chromium-contained slag from non-calcium roasting with sulfuric acid was studied. The effects of sulfuric acid concentration, reaction temperature, added amount of chromic anhydride, reaction time and particle size on the leaching of chromium were examined. The results show that the main phase components of the slag determined by systematic analysis and characterization are chromite (FeCr2O4), iron magnesium ore [Mg(Fe,Al)2O4], the content of spinel minerals is 73.11%, hematite (a-iron) 12.42%, and sodium nepheline (NaAlSiO4) 10.02%. The optimum leaching conditions of chromium in the slag are obtained as: sulfuric acid concentration 65%, temperature 120℃, added content of chromium anhydride 10% of chromium slag, time 2 h, particle size 75 mm and stirring speed 500 r/min. Under the conditions, the leaching rate reaches 97.93%. The leaching residue is silica-based, with 80.8% SiO2. The pressure leaching of chromium-containing slag from non-calcium roasting with sulfuric acid can be modeled with the shrinking core model. The apparent activation energy is 16.38 kJ/mol. The leaching rate is controlled by external diffusion and interface chemical reaction.

Key words: chromium-containing slag, phase, sulfuric acid, leaching, high pressure, chromic anhydride

中图分类号: