欢迎访问过程工程学报, 今天是

过程工程学报 ›› 2017, Vol. 17 ›› Issue (4): 684-688.DOI: 10.12034/j.issn.1009-606X.216374

• 流动与传递 • 上一篇    下一篇

CFD-DEM模拟颗粒形状对流化床二元颗粒混合特性的影响

王力军,韦光超,段叔平,徐凌锋   

  1. 沈阳航空航天大学能源与环境学院,辽宁 沈阳 110136
  • 收稿日期:2016-12-16 修回日期:2017-01-14 出版日期:2017-08-20 发布日期:2017-08-16
  • 通讯作者: 王力军 wlj0803@163.com
  • 基金资助:
    国家重点基础研究发展计划项目

CFD?DEM Simulation of Influence of Particle Shape on Binary Particles Mixing Characteristics in Fluidized Bed

Lijun WANG*,  Guangchao WEI,  Shuping DUAN,  Lingfeng XU   

  1. College of Energy and Environment, Shenyang Aerospace University, Shenyang, Liaoning 110136, China
  • Received:2016-12-16 Revised:2017-01-14 Online:2017-08-20 Published:2017-08-16

摘要: 用计算流体力学耦合离散元方法(CFD?DEM)对Goldschmidt等建立的矩形流化床床内气固混合特性进行三维数值模拟,采用欧拉体系k??湍流模型模拟气相,采用拉格朗日体系离散元方法模拟固相,引入Lacey混合指数作为量化标准,研究了垃圾衍生燃料颗粒形状对混合的影响. 结果表明,圆柱状颗粒的混合质量比同体积当量比的球形颗粒差,且达到混合平衡所需时间较长,垃圾衍生燃料颗粒轴向浓度分布在床层上部高于底部.

关键词: 流化床, 离散单元方法, 混合特性, 二元混合物, 两相流

Abstract: Three-dimensionally combined computational fluid dynamics (CFD) with discrete element method (DEM) were employed to investigate the gas?solid mixing characteristics of referring to the 3D rectangular fluidized bed explored by Goldschmidt et al. Eulerian turbulent model and Lagrangian particle tracking method were used to model the gas and solid phases respectively. Focused on the influence of the shape of refuse derived fuel (RDF) particle on mixing was investigated, and the Lacey mixing index was introduced as a quantitative criterion. The results showed that the mixing quality of cylindrical particles is less than that of spherical particles with the same volume equivalence ratio and the time required reaching the mixing equilibrium is longer. The distribution of the RDF particle concentration in the bed upper part is higher than the bottom.

Key words: fluidized-bed, discrete element method, mixing characteristics, binary mixture, two-phase flow