欢迎访问过程工程学报, 今天是

过程工程学报 ›› 2017, Vol. 17 ›› Issue (4): 779-784.DOI: 10.12034/j.issn.1009-606X.217146

• 过程与工艺 • 上一篇    下一篇

多功能铁水包模式经济连浇炉数计算模型

袁 飞1, 徐安军1*, 贺东风1, 谷宗喜1, 冯 凯1, 刘晶波2   

  1. 1. 北京科技大学冶金生态工程学院,北京 100083;2. 重庆钢铁集团股份有限公司,重庆 401258
  • 收稿日期:2017-02-22 修回日期:2017-04-16 出版日期:2017-08-20 发布日期:2017-08-16
  • 通讯作者: 徐安军 anjunxu@126.com
  • 基金资助:
    钢铁生产流程工序匹配与系统节能;自然科学基金项目:面向工序装置尺度的钢铁制造流程一体化智能调度建模与仿真

Calculation Model for Determining Economical Continuous Casting Heats in Multi-functional Hot Metal Ladle Mode

Fei YUAN 1,  Anjun XU1*,  Dongfeng HE1,  Zongxi GU1,  Kai FENG1,  Jingbo LIU2   

  1. 1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China; 
    2. Chongqing Iron and Steel Co., Ltd., Chongqing 401258, China
  • Received:2017-02-22 Revised:2017-04-16 Online:2017-08-20 Published:2017-08-16

摘要: 以综合成本最优为目标,分别建立转炉热源充足及热源平衡(欠热)两种情况下的经济连浇炉数计算模型,经济连浇炉数为由铁水包备包造成的成本损失与中间包耐材损失、钢水收得率成本损失之和相减,综合成本损失最小的连浇炉数. 应用该模型,以重钢新区2#连铸机SPHC钢种为案例进行计算,转炉热源富余和热源平衡(欠热)情况下的经济连浇炉数分别为16和15炉.

关键词: 铁水包, 备包, 成本, 连浇炉数, 计算模型

Abstract: Calculation model of economical continuous casting heats both in the case of the sufficient and balanced (inadequate) heat supply for BOF was established respectively with the objective of the optimal comprehensive cost. The minimum cost losses could be obtained when the cost losses due to ladle preparation was subtracted from that of the sum of the refractory of the tundish and the molten steel recovery rate. Selecting the steel grade SPHC of No.2 caster in Chongqing Iron & Steel Co., Ltd. as investigation case, the model is applied to calculate the economical continuous casting heats, whose result are 16 and 15 with the sufficient and balanced (inadequate) converter heat supply, respectively.

Key words: hot metal ladle mode, ladle preparation, cost, continuous casting heats, calculation model