欢迎访问过程工程学报, 今天是

›› 2006, Vol. 6 ›› Issue (5): 837-840.

• 材料工程专栏 • 上一篇    下一篇

多壁碳纳米管的球磨处理对其吸附储氢性能的影响

姚运金,张素平,颜涌捷   

  1. 华东理工大学资源与环境工程学院
  • 出版日期:2006-10-20 发布日期:2006-10-20

Ball Milling Process and Its Effect on Hydrogen Adsorption Storage of MWNTS

YAO Yun-jin,ZHANG Su-ping,YAN Yong-jie   

  1. School of Resource and Environment Engineering, East China University of Science and Technology
  • Online:2006-10-20 Published:2006-10-20

PDF

摘要： 研究了球磨改性对多壁碳纳米管储氢性能的影响，球磨处理前后的碳纳米管微观结构采用TEM和XRD进行表征. 结果发现，球磨处理能使碳纳米管长度变短，管端口打开，缺陷增多，表面积增大，球磨处理12 h的碳纳米管的吸附量从未球磨的1.60%(w)提高到2.55%(w)，表明球磨改性能明显提高碳纳米管的吸附量.

关键词: 多壁碳纳米管, 吸附储氢, 化学气相沉积法, 球磨

Abstract: The effect of mechanical ball milling with different time on the hydrogen adsorption behavior of the multi-wall carbon nanotubes (MWNTs) was studied. The microstructure characteristics of MWNTs before and after ball milling were examined by transmission electron microscope (TEM) and X-ray diffraction (XRD). The results showed that ball milling could break MWNTs, shorten their length, open the tips of the tubes, and increased their surface defects and specific surface area at the same time. After ball milling for 12 h, the hydrogen storage capacity of MWNTs increased from 1.60% to 2.55%. The enhancement of hydrogen adsorption might result from the increase of defects and surface area of the MWNTs caused by ball milling.

Key words: multi-wall carbon nanotubes, hydrogen adsorption storage, chemical vapor deposition, ball milling