欢迎访问过程工程学报, 今天是

过程工程学报 ›› 2017, Vol. 17 ›› Issue (5): 995-1001.DOI: 10.12034/j.issn.1009-606X.217105

• 过程与工艺 • 上一篇    下一篇

煤焦化学链气化过程中神木煤灰对铁基载氧体反应特性及结构的影响

万奇顺, 刘永卓, 郭庆杰*, 田安红   

  1. 青岛科技大学化工学院,清洁化工过程山东省高校重点实验室,山东 青岛 266042
  • 收稿日期:2017-01-04 修回日期:2017-03-30 出版日期:2017-10-20 发布日期:2017-10-10
  • 通讯作者: 郭庆杰 qjguo@qust.edu.cn; qj_guo@yahoo.com
  • 基金资助:
    流动/多组分反应对循环载氧体尺度、结构及反应活性影响;MW级煤炭载氧体化学链气化系统关键基础化学工程问题研究-前瞻性专题;载氧体颗粒对煤中汞释放及形态转化的影响机理;煤化学链一步制甲烷系统构建及基础研究

Influence of Shenmu Coal Ash on the Reaction Characteristics and Structure of Fe-based Oxygen Carrier in Coal Char Chemical Looping Gasification

Qishun WAN,  Yongzhuo LIU,  Qingjie GUO*,  Anhong TIAN   

  1. Key Lab of Clean Chem. Process Shandong Province, Qingdao Univ. Sci. & Technol., Qingdao, Shandong 266042, China
  • Received:2017-01-04 Revised:2017-03-30 Online:2017-10-20 Published:2017-10-10
  • Contact: GUO Qing-jie qjguo@qust.edu.cn; qj_guo@yahoo.com

摘要: 以水蒸气为气化剂、Fe4Al6(Fe2O3:Al2O3质量比4:6)为载氧体,在高温间歇流化床中添加神木煤灰模拟串行循环流化床,研究煤灰累积对煤焦化学链气化过程中载氧体反应性能及结构的影响. 结果表明,在800?900℃的化学链气化过程中,添加5%?15%(?)神木煤灰可降低Fe4Al6载氧体还原反应的温度、提高其还原反应速率. 添加15%神木煤灰可明显促进煤焦水蒸气气化,提高煤焦碳转化率. Fe4Al6载氧体还原反应温度为950?1000℃、系统中含20%神木煤灰及1000℃、系统中含15%神木煤灰时,神木煤灰易与Fe4Al6载氧体反应生成Fe2SiO4, FeAl2O4, CaFe4Al2O10和CaAl8Fe4O19等低熔点物质,使Fe4Al6载氧体孔堵塞、表面烧结.

关键词: 化学链气化, 载氧体, 煤灰, 流化床, 烧结

Abstract: The influence of coal ash accumulation content on the reaction between Shenmu coal char and Fe4Al6 oxygen carrier (Fe2O3: Al2O3 mass ratio 4:6) and the oxygen carrier microstructure by adding Shenmu coal ash was investigated in a laboratory-scale fluidized bed. The results showed that addition 5%?15%(?) ash can reduce the reduction reaction temperature of Fe4Al6 oxygen carrier and increase the reaction rate between oxygen carrier and coal char at the temperature of 800?900℃. Carbon conversion rate curve was fit by Gaussian peak fitting method, indicating that 15% ash can promote the char gasification stage and increase the carbon conversion rate. It found that low-melting-point compounds, such as Fe2SiO4, FeAl2O4, CaAl8Fe4O19 and CaFe4Al2O10 formed in the oxygen carrier with 20% ash at 950?1000℃ of reduction reaction temperature of Fe4Al6 oxygen carrier and with 15% ash high than 1000℃. The compounds with low melt point and low thermal conductivity may attribute to the sintering and agglomeration of the Fe4Al6 oxygen carrier.

Key words: chemical looping gasification, oxygen carrier, coal ash, fluidized bed, sintering