欢迎访问过程工程学报, 今天是

›› 2001, Vol. 1 ›› Issue (2): 0-0.

• 2 •    

平面射流连续反应器的传质性能

叶树峰，黄晔，田新中，黄泽明，等   

  1. 1. 中国科学院化工冶金研究所，北京100080; 2. 北京科技大学，北京100083; 3. 河北邢台钢铁公司，河北 邢台054000; 4. 江西新余钢铁公司，江西 新余338001
  • 出版日期:2001-04-20 发布日期:2001-04-20

Research on the Mass Transfer Capability of the Flat Jet Continuous Reactor

YE Shu-feng1, HUANG Ye2, LI Jie2, TIAN Xin-zhong3, XIE Yu-sheng1, JIN Shan-tong2, HUANG Ze-ming4, DING Yi4   

  1. 1. Inst.Chem．Metall., CAS, Beijing 100080, China; 2. Univ. Sci. & Technol. Beijing, Beijing 100083, China; 3. Xingtai Iron and Steel Co. Ltd.., Xingtai,Hebei 054000; 4. Xinyu Iron and Steel Co.Ltd.., Xinyu,Jiangxi 338001
  • Online:2001-04-20 Published:2001-04-20

PDF

摘要： 采用水-煤油(溶有β-萘酚)体系对平面射流连续反应器的传质系数进行了测定，实验结果表明：体积传质系数随搅拌强度的增大而增大，平面射流厚度为3和4 mm时，体积传质系数与搅拌强度有较好的线性关系；从体积传质系数的大小分析，平面射流连续反应器具有较好的传质能力，有潜在的较好的反应动力学条件.

关键词: 平面射流, 搅拌强度, 传质系数

Abstract: The experimental measurement of mass transfer coefficient for the flat jet continuous reactor has been done in a water-kerosene system with 2-naphthol transferred between liquid phases. The mass transfer coefficient is found to vary in a linear way with stirring intensity when the flat jet thickness is 3 mm or 4 mm. The flat jet continuous reactor is promising in application in iron and steel making for its great capability of interphase mass transfer.

Key words: flat jet, stirring intensity, mass transfer coefficient

中图分类号: