[1] Nguyen T V, Brennen C E, Sabersky R H. Funnel Flow in Hoppers[J]. Journal of Applied Mechanics-Transactions of the ASME, 1980, 47: 729-735.
[2] Zhong Z, Ooi J Y, Rotter J M. The Sensitivity of Silo Flow and Wall Stresses to Filling Method[J]. Engineering Structures, 2001,23:756-767.
[3] Schulze D. Powders and Bulk Solids: Behavior, Characterization, Storage and Flow[M]. Berlin: Springer,2007:
[4] Artoni R, Santomaso A, Canu P. Simulation of Dense Granular Flows: Dynamics of Wall Stress in Silos[J]. Chemical Engineering Science, 2009, 64:4040-4050.
[5] Babout L, Grudzien K, Maire E, et al. Influence of Wall Roughness and Packing Density on Stagnant Zone Formation During Funnel Flow Discharge from a Silo: An X-ray Imaging Study[J]. Chemical Engineering Science, 2013,97:210-224.
[6] Hsiau S S, Smid J, Tsai S A, et al. Flow of Filter Granules in Moving Granular Beds with Louvers and Sublouvers[J]. Chemical Engineering and Processing, 2008, 47: 2084-2097.
[7] Kamath S, Kunte A, Doshi P, et al. Flow of Granular Matter in a Silo with Multiple Exit Orifices: Jamming to Mixing[J]. Physical Review E, 2014, 90: 062206.
[8] Cheng Y M, Chau K T, Xiao L J, et al. Flow Pattern for a Silo with Two Layers of Materials with Single or Double Openings[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2010, 136: 1278-1286.
[9] 肖晓,苏景林,许光文,等. 移动床出口设置对卸料特性影响的离散模拟研究[J],化工学报,2016,67(5):1710-1718.
Xiao X, Su J L, Xu G W, et al. Discrete Modeling of Discharge Dynamics of Granular Material in Moving Bed:Effect of Outlet Setting[J], Journal of chemical industry, 2016,67(5):1710-1718.
[10] Yang S C, Hsiau S S. The Simulation and Experimental Study of Granular Materials Discharged from a Silo with the Placement of Inserts[J], Powder Technology, 2001,120: 244-255.
[11] 曹俊,金保昇,钟文琪,等. 带有内构件错流移动床颗粒流动特性的数值模拟[J]. 机械工程学报,2013,49(10): 144-150.
Cao J, Jin B S, Zhong W Q, et al. Numerical Simulation of the Particle Flow Characteristic in Cross-flow Moving Bed with Internals[J]. Journal of Mechanical Engineering, 2013,49(10): 144-150.
[12] Hsiau S S, Smid J, Chyou Y P, et al. Impact of Flow-corrective Insert on Flow Patterns in Two-dimensional Moving Bed[J]. Chemical Engineering and Processing, 2013, 73: 7-15.
[13] Hartl J, Ooi J Y, Rotter J M, et al. Ding, S., Enstad, G. G., The Influence of a Cone-in-cone Insert on Flow Pattern and Wall Pressure in a Full-scale Silo[J], Chemical Engineering Research and Design, 2008, 86: 370-378.
[14] Alonso-Marroquin F, Azeezullah S I, Galindo-Torres S A, et al, Bottlenecks in Granular Flow: When Does an Obstacle Increase the Flow Rate in an Hourglass[J]. Physical Review E, 2012, 85: 020301(R).
[15] Zuriguel I, Janda A. Garcimartin A, et al. Silo Clogging Reduction by the Presence of an Obstacle[J], Physical Review Letters, 2011, 107: 278001.
[16] Cundall P A, Strack O D L. A Discrete Numberical Model for Granular Assemblies[J]. Geotechnique, 1979, 29: 47-65.
[17] 孙其诚,刘晓星,张国华,等. 密集颗粒物质的介观尺度研究综述[J],力学进展,2017,47:263-308.
Sun Q C, Liu X X, Zhang G H, et al. The Mesoscopic Structures of Dense Granular Materials. Mechanical Progress, 2017,47:263-308.
[18] Hoomans B P B. Granular Dynamics of Gas-Solid Two-Phase Flows[D], PhD thesis, Nertherland :University of Twente, 1999
[19] Drescher A, Ferjani M. Revised Model for Plug/funnel Flow in Bins[J]. Powder Technology, 2004,141:44-54.
[20] Myers M E, Selles M. (1971). Chemical Engineering, Tripos Part 2: Research Project Report[J], Cambridge University Press: Cambridge, U.K..
|