欢迎访问过程工程学报, 今天是

›› 2002, Vol. 2 ›› Issue (4): 0-0.

• 4 •    

纳米PbS-TiO2复合薄膜的制备和摩擦学性能

陈云霞,王博,刘维民   

  1. 中国科学院兰州化学物理研究所固体润滑国家重点实验室,甘肃 兰州 730000
  • 出版日期:2002-08-20 发布日期:2002-08-20

Preparation of LiMn2O4 Lithium-ion Battery Cathode Material

ZHAO Ming-shu, ZHAI Yu-chun, TIAN Yan-wen   

  1. College of Automation, Nanjing University of Technology, Nanjing, Jiangsu 210009, China
  • Online:2002-08-20 Published:2002-08-20

摘要: 采用溶胶-凝胶法制备纳米PbS-TiO2复合薄膜,研究了其微结构和摩擦学性能,并探讨了复合薄膜的磨损机制. 结果表明:纳米PbS为面心立方相结构,粒径约15 nm;10%PbS-TiO2复合膜具有良好的抗磨减摩性能,薄膜的磨损机制主要是轻微的擦伤、粘着转移和磨粒磨损.

关键词: 溶胶-凝胶法, PbS-TiO2, 纳米复合薄膜, 摩擦学性能

Abstract: In view of the existing problem of the former control system of the Yangzhi Petrochemicals butadiene distillation column, voluminous plant operation data collected by DCS and simulated results from a theoretical model are pooled together and used to build the adaptive soft-sensor instrument for butadiene and alkynes contents in the distillation column top based on the BP neural network technique. Then, an inferential control system was designed according to the targets of product quality, in which the on-line estimating values of soft sensor instrument were used. As a result of increasing logic calculation in the inferential control arithmetic, the robustness of the control system is strengthened. Application of the control system to the column showed that the control system can run smoothly over a long period in worksites, and has realized the close-loop control of product quality.

Key words: lithium-ion battery, cathode material, LiMn2O4, multiple sinter method, Jahn-Teller domio effect

中图分类号: