欢迎访问过程工程学报, 今天是

过程工程学报 ›› 2017, Vol. 17 ›› Issue (4): 810-813.DOI: 10.12034/j.issn.1009-606X.217102

• 过程与工艺 • 上一篇    下一篇

基于化学激发的钢渣胶凝活性

张 浩1,3,5， 龙红明1,2,3*， 杨 刚4， 刘在春1， 刘秀玉5   

  1. 1. 安徽工业大学冶金工程学院，安徽 马鞍山 243032；2. 钢铁冶金新技术国家重点实验室(北京科技大学)，北京 100083； 3. 冶金减排与资源综合利用教育部重点实验室(安徽工业大学)，安徽 马鞍山 243002； 4. 中冶宝钢技术服务有限公司，上海 200941；5. 安徽工业大学建筑工程学院，安徽 马鞍山 243032
  • 收稿日期:2017-01-03 修回日期:2017-02-10 出版日期:2017-08-20 发布日期:2017-08-16
  • 通讯作者: 张浩 fengxu19821018@163.com
  • 基金资助:
    国家自然科学基金资助项目;钢铁冶金新技术国家重点实验室（北京科技大学）资助项目

Steel Slag Cementitious Activity Based on Chemical Excitation

Hao ZHANG1,3,5,  Hongming LONG1,2,3*,  Gang YANG4,  Zaichun LIU1,  Xiuyu LIU5   

  1. 1. School of Metallurgical Engineering, Anhui University of Technology, Ma?anshan, Anhui 243032, China; 
    2. State Key Laboratory of Advanced Metallurgy (University of Science and Technology Beijing), Beijing 100083, China; 
    3. Key Laboratory of Metallurgical Emission Reduction & Resources Recycling (Anhui University of Technology) Ministry of Education, Ma?anshan, Anhui 243002, China; 
    4. MCC Baosteel Technology Services Co., Ltd., Shanghai 200941, China; 
    5. School of Civil Engineering and Architecture, Anhui University of Technology, Ma?anshan, Anhui 243032, China
  • Received:2017-01-03 Revised:2017-02-10 Online:2017-08-20 Published:2017-08-16
  • Contact: ZHANG Hao fengxu19821018@163.com

PDF

摘要： 以钢渣为研究对象，分别用硅酸钠、硫酸钠、碳酸钠、硫酸和醋酸激发钢渣的胶凝活性，依据相关标准测定了7 d和28 d时的活性指数. 结果表明，水玻璃、碳酸钠和醋酸可较好地激发钢渣胶凝活性，水玻璃掺量为1.6%(?)、碳酸钠掺量为2.4%(?)和醋酸浓度为0.10 mol/L时，激发钢渣胶凝活性最佳. 硫酸钠和硫酸对钢渣具有良好的活性激发作用，尤其早期对钢渣活性激发效果更好，硫酸钠掺量为3.2%(?)和硫酸浓度为0.10 mol/L时，激发钢渣胶凝活性最佳.

关键词: 钢渣, 激发剂, 钢渣胶凝活性, 化学激发, 胶凝材料

Abstract: Steel slag as the research object, steel slag cementitious activity was excited by sodium silicate, sodium sulfate, sodium carbonate, sulfuric acid and acetic acid, respectively. According to relevant standard, the activity index was measured after test for 7 and 28 d. The results showed that sodium silicate, sodium carbonate and acetic acid can better excitation steel slag cementitious activity, the steel slag cementitious activity was best with sodium silicate 1.6%(?), sodium carbonate 2.4%(?) and acetic acid 0.10 mol/L. Sodium sulfate and sulfuric acid can excited steel slag cementitious activity good, especially in the early stage, the steel slag cementitious activity was best with sodium sulfate 3.2%(?) and sulfuric acid 0.10 mol/L.

Key words: steel slag, activator, steel slag cementitious activity, chemical excitation, cementitious materials