内插螺旋线强化糖浆立式降膜蒸发传热

doi:10.12034/j.issn.1009-606X.217133

过程工程学报 ›› 2017, Vol. 17 ›› Issue (6): 1134-1139.DOI: 10.12034/j.issn.1009-606X.217133

内插螺旋线强化糖浆立式降膜蒸发传热

彭德其^1*，陈兰伟¹，罗海松¹，俞天兰²，陈康¹，李昊¹，韩玉叶¹

1. 湘潭大学机械工程学院，湖南湘潭 411105：2. 湖南工业大学机械工程学院，湖南株洲 412007

收稿日期:2017-02-13 修回日期:2017-04-20 出版日期:2017-12-20 发布日期:2017-12-05
通讯作者: 彭德其 pengshuaike@163.com

Heat Transfer Enhancement of Syrup Vertical Falling-film Evaporation by Spiral Inserts

Deqi PENG^1*, Lanwei CHEN¹, Haisong LUO¹, Tianlan YU², Kang CHEN¹, Hao LI¹, Yuye HAN¹

1. School of Mechanical Engineering, Xiangtan University, Xiangtan, Hunan 411105, China; 2. School of Mechanical Engineering, Hunan University of Technology, Zhuzhou, Hunan 412007, China

Received:2017-02-13 Revised:2017-04-20 Online:2017-12-20 Published:2017-12-05

摘要/Abstract

摘要： 搭建了新型立式单管蒸汽?糖浆降膜蒸发实验平台，进行连续4 h加与不加螺旋线的降膜蒸发运行对比实验，研究管内插入特定结构和工艺参数的螺旋线对变粘性糖浆降膜蒸发传热性能的影响. 结果表明，内插螺旋线可明显改善糖浆降膜蒸发传热效果，相同条件下，内插螺旋线时总传热系数比空管提高了25.9%~82.9%，且随时间延长其下降速率明显低于空管；从管内蒸发侧和管外冷凝侧传热角度分析降膜蒸发传热性能，传热温差增大，管内蒸发侧传热性能变好，管外冷凝侧传热性能变差，增大传热温差改变物料物性(粘度减小)可强化传热效果. 在非结垢影响的传热时间内，对管内蒸发侧传热系数进行处理，得到了管内综合传热系数与传热温差的实验关联式.

关键词: 糖浆, 降膜蒸发, 螺旋线, 传热系数

Abstract: The new form of vertical single tube steam-syrup falling film evaporation experimental platform was built to study the heat transfer performance of inserting the specific structure and technological parameters’ spiral in tube for the viscous syrup falling film evaporation, and conducting the 4 h comparative syrup falling film evaporation experiment for added and no added spiral. The results showed that inserting spiral has obviously effect on improving the heat transfer performance of syrup falling film evaporation, under the same experimental conditions, the total heat transfer coefficient improved 25.9%~82.9% than that inserted nothing, and the decline rate of total heat transfer coefficient with time was lower apparently. When the heat transfer temperature difference increased, the heat transfer of the evaporation side for inner tube get better but the condensation side for outer tube get deterioration, material physical properties changes (viscosity reduction) can enhanced heat transfer effect by increasing the heat transfer temperature difference. In the non-fouling affected heat transfer period, further processed was made for the evaporation side heat transfer coefficient, which obtaining the correlation between the inner tube comprehensive heat transfer coefficient and heat transfer temperature difference.

Key words: syrup, falling film evaporation, spiral, heat transfer coefficient

彭德其陈兰伟罗海松俞天兰陈康李昊韩玉叶. 内插螺旋线强化糖浆立式降膜蒸发传热[J]. 过程工程学报, 2017, 17(6): 1134-1139.

Deqi PENG Lanwei CHEN Haisong LUO Tianlan YU Kang CHEN Hao LI Yuye HAN. Heat Transfer Enhancement of Syrup Vertical Falling-film Evaporation by Spiral Inserts[J]. Chin. J. Process Eng., 2017, 17(6): 1134-1139.

参考文献

[1]Tobe P, Wiedemann K G.Falling film evaporators for the sugar industry[J].ZuckerInd, 1992, 1(17):73-76
[2]Journet G.Falling film evaporators in cane sugar mills[J].International sugar journal, 2005, 107(1280):468-474
[3] Saravacos G, Kostaropoulos A E.Food Evaporation Equipment[M]//Handbook of Food Processing Equipment. Springer International Publishing, 2016: 331-365.
[4]Fujita T, Ueda T.Heat transfer to falling liquid films and film breakdown-I: Subcooled liquid films[J].International Journal of Heat and Mass Transfer, 1978, 21(2):97-108
[5]Toshihiko F, Tatsuhiro U.Heat transfer to falling liquid films and film breakdown—II: Saturated liquid films with nucleate boiling[J].International Journal of Heat and Mass Transfer, 1978, 21(2):109-118
[6] B.[J]., 2007, :2111-2111
[7] 范永坚, 徐宏, 徐鹏.竖直多孔管降膜蒸发传热实验[J]. 化工学报, 2016, 02:512-518.
[8]FAN Yongjian（范永坚）, XU Hong（徐宏）, XU Peng（徐鹏）.Heat transfer experiment of falling-film evaporation in vertical porous tube[J]. CIESC Journal, 2016, 02:512-518.
[9] Karlsson E, Gourdon M, Olausson L, et al.Heat transfer for falling film evaporation of black liquor up to very high Prandtl numbers[J]. International Journal of Heat and Mass Transfer, 2013, 65: 907-918.
[10]王永福, 周荣琪, 段占庭.脂肪酸降膜蒸发传热研究[J]. 化学工程, 2001, 06:20-23+2.
[11]Wang Yongfu（王永福）, Zhou Rongqi（周荣琪）, Duan Zhanting（段占庭）.Heat transfer experiment of fatty acid falling-film evaporation[J]. Chemical Engineering, 2001, 06:20-23+2.
[12] 石程名, 王洋, 宫世吉.溴化锂溶液竖管内降膜蒸发传热性能分析[J]. 重庆大学学报, 2010, v.3309:113-118.
[13]SHI Cheng-ming（石程名）, WANG Yang（王洋）, GONG Shi-ji（宫世吉）.Heat transfer performance analysis of lithium bromide solution falling film evaporation in vertical tube.Journal of Chongqing University, 2010, v.3309:113-118.
[14] 牛小翠, 马晓建.木质素悬浮液管式降膜蒸发传热研究[J]. 化学工程, 2011, 12:44-47+54.
[15]牛小翠, -马晓建.Study on Evaporation Heat Transfer of Falling Film in Lignin Suspension[J].Chemical Engineering, 2011, 39(12):44-47
[16]Palen J W, Wang Q, Chen J C.Falling film evaporation of binary mixtures[J].AIChE Journal, 1994, 40(2):207-214
[17]Alla A N, Feddaoui M, Meftah H.Simultaneous heat and mass transfer inside a vertical channel in evaporating a heated falling glycols liquid film[J].Heat and Mass Transfer, 2015, 51(12):1747-1760
[18] Muram E, ?kesj? A, Jongsma A, et al.Experimental study of the heat transfer in a falling film evaporator: influence of the co-flowing vapor[C]. International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2014.
[19]Mura E, ?kesj? A, Vamling L, et al.Effect of Co-flowing Vapor during Vertical Falling-film Evaporation[J].Experimental Heat Transfer, 2016, 29(4):561-575
[20] Bhagat J J.Falling film evaporation in the cane sugar industry-an Indian experience[J]. Indian Sugar, 1997, 47: 101-110.
[21]Jorge L M M, Righetto A R, Polli P A, et al.Simulation and analysis of a sugarcane juice evaporation system[J].Journal of food engineering, 2010, 99(3):351-359
[22] Krueger A, Pouponnot F.Heat exchanger performance enhancement through the use of tube inserts in refineries and chemical plants–successful application examples: Spirelf, Turbotal and Fixotal systems[C]//Proc. International Conference on Heat Exchanger Fouling and Cleaning VIII, Austria. 2009: 399-406.
[23]Nindo C I, Tang J, Powers J R, et al.Viscosity of blueberry and raspberry juices for processing applications[J].Journal of Food Engineering, 2005, 69(3):343-350
[24]Dhir V K, Lienhard J H.Laminar film condensation on plane and axisymmetric bodies in nonuniform gravity[J].ASEM J Heat Transfer, 1971, 93(1):97-100
[25]Gregoring R, Kern J, Turek K.Improved correlation of film condensation data based on a more rigorous application of similarity parameters[J].Warme—Stoffubertrangung, 1974, 7(1):1-13
[26] 杨世铭, 陶文铨.传热学[M].第四版.北京：高等教育出版社, 2006:563.
[27]Yang shiming（杨世铭）, Tao wenquang（陶文铨）.Chuanrexue(in Chinese)[M]. The fourth edition.beijing：Higher Education Press, 2006:563.

内插螺旋线强化糖浆立式降膜蒸发传热

Heat Transfer Enhancement of Syrup Vertical Falling-film Evaporation by Spiral Inserts

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 6

编辑推荐

Metrics

[1]	陈德敏刘莹惠陆彪汤凯王索军陈光. 层流冷却传热系数对金属物料温度场的影响[J]. 过程工程学报, 2021, 21(9): 1033-1041.
[2]	王力军段叔平徐凌锋孙嘉君. 柱形流化床传热特性的数值模拟[J]. 过程工程学报, 2019, 19(1): 110-117.
[3]	张天琦张翠翠葛仕福余辉杨叙军. 垂直旋转圆盘内蒸汽与物料间传热性能研究[J]. 过程工程学报, 2017, 17(2): 243-247.
[4]	彭德其张浪俞天兰吴淑英支校衡陈前. 管内螺旋液固两相流的流动行为及传热[J]. , 2015, 15(1): 45-49.
[5]	钱小静;王志峰;黄雄斌. 搅拌槽中垂直列管外壁表面传热系数的模拟计算[J]. , 2007, 7(5): 853-858.
[6]	王晨;桑芝富. 1/4椭圆螺旋折流板换热器性能的数值模拟[J]. , 2007, 7(3): 425-431.