欢迎访问过程工程学报, 今天是

过程工程学报 ›› 2022, Vol. 22 ›› Issue (10): 1333-1348.DOI: 10.12034/j.issn.1009-606X.222282

• 综述 • 上一篇    下一篇

有色金属工业低碳技术分析与思考

郑诗礼*, 叶树峰*, 王倩, 马淑花, 王志, 孙峙, 乔珊, 仉小猛, 张懿
  

  1. 中国科学院过程工程研究所,北京 100190
  • 收稿日期:2022-08-03 修回日期:2022-08-29 出版日期:2022-10-28 发布日期:2022-10-26
  • 通讯作者: 郑诗礼 slzheng@ipe.ac.cn
  • 作者简介:郑诗礼(1974-),男,江西省玉山县人,博士,研究员,化学工艺专业;通讯联系人,郑诗礼,E-mail: slzheng@ipe.ac.cn;叶树峰,E-mail: sfye@ipe.ac.cn.

Analysis and thinking of low-carbon technology in non-ferrous metal industry

Shili ZHENG*,  Shufeng YE*,  Qian WANG,  Shuhua MA,  Zhi WANG,  Zhi SUN,  Shan QIAO,  Xiaomeng ZHANG,  Yi ZHANG   

  1. Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China
  • Received:2022-08-03 Revised:2022-08-29 Online:2022-10-28 Published:2022-10-26
  • Contact: ZHENG Shi-li slzheng@ipe.ac.cn

摘要: 有色金属工业减碳是工业过程减碳的重要抓手。本工作综述了有色金属工业碳排放现状和特点,在此基础上提出了有色金属工业尤其是重点冶炼行业的低碳技术路径。分析表明,铝冶炼行业是有色金属工业二氧化碳减排的核心,预计2025年有色金属工业将实现碳达峰,碳达峰时二氧化碳排放量为7.5亿吨;有色金属工业减碳技术路径主要包括清洁能源替代、发展先进的低碳技术与装备、金属再生利用及碳捕集利用(CCU)等,其中金属再生利用是有色金属工业支撑实现国家“双碳”目标的重要路径。

关键词: 有色金属工业, 碳达峰碳中和, 低碳技术, 铝冶炼

Abstract: Reduction of carbon dioxide emission in the non-ferrous metal industry is critical for realizing the carbon peaking and carbon neutrality goals in China. State-of-the-art of carbon dioxide emissions in the non-ferrous metal industry were summarized and analyzed here. Based on this, the low-carbon technology path of non-ferrous metal industry, especially the key smelting industry, was put forward. The analysis shows that the aluminum smelting industry is the core of carbon dioxide emission reduction in the non-ferrous metal industry. It is expected that the non-ferrous metal industry will achieve a peak of carbon dioxide emission in 2025 with the peak value being 750 million tons carbon dioxide. The carbon dioxide reduction technology path of the non-ferrous industry mainly includes four parts, which are, green energy substitution, advanced low-carbon technologies and equipment, metal recycling, and carbon capture and utilization (CCU). Among them, metal recycling is the key path for the non-ferrous industry to support the realization of the national carbon peaking and carbon neutrality goals.

Key words: Non-ferrous metal industry, carbon neutralization carbon peak, low-carbon technology, aluminum smelting industry