欢迎访问过程工程学报, 今天是

过程工程学报 ›› 2022, Vol. 22 ›› Issue (10): 1368-1378.DOI: 10.12034/j.issn.1009-606X.222321CSTR: 32067.14.jproeng.222321

• 综述 • 上一篇    下一篇

电弧炉炼钢应用生物质的研究进展

韩成金2， 朱荣1,2,3*， 魏光升1,2,3
  

  1. 1. 北京科技大学二氧化碳科学研究中心，北京 100083 2. 北京科技大学冶金与生态工程学院，北京 100083 3. 北京科技大学高端金属材料特种熔炼与制备北京市重点实验室，北京 100083
  • 收稿日期:2022-09-02 修回日期:2022-10-10 出版日期:2022-10-28 发布日期:2022-10-26
  • 通讯作者: 朱荣 zhurong@ustb.edu.cn
  • 作者简介:韩成金(1999-)，男，辽宁省营口市人，冶金工程专业，E-mail: 1627883089@qq.com；通讯联系人，朱荣，E-mail: zhurong@ustb.edu.cn.
  • 基金资助:
    非涉碳炼钢工艺的基础研究;基于CO2喷射的钢液真空冶金反应强化机理研究;电弧炉减污降碳高效冶炼关键技术的研究与应用;中国宝武低碳冶金创新基金资助项目

Research progress of biomass application in EAF steelmaking

Chengjin HAN2,  Rong ZHU1,2,3*,  Guangsheng WEI1,2,3   

  1. 1. Carbon Dioxide Science Research Center, University of Science and Technology Beijing, Beijing 100083, China 2. Metallurgical and Ecological Engineering School, University of Science and Technology Beijing, Beijing 100083, China 3. Beijing Key Laboratory of Special Melting and Preparation of High-end Metal Materials, University of Science and Technology Beijing, Beijing 100083, China
  • Received:2022-09-02 Revised:2022-10-10 Online:2022-10-28 Published:2022-10-26
  • Contact: ZHU Rong RongZHU zhurong@ustb.edu.cn
  • Supported by:
    ;China Baowu Low Carbon Metallurgy Innovation Foudation

RichHTML

PDF

摘要： 在当前碳达峰与碳中和的背景下，钢铁行业作为CO2排放大户，长期面临着碳减排的巨大压力。因此大力发展具有更低碳排放的电弧炉短流程炼钢将是钢铁行业实现减排的有效措施。但尽管短流程炼钢的碳排放量较长流程炼钢相比大大减少，但其冶炼过程也仍需使用大量的煤炭资源以达到冶炼要求。因此寻找一个合适的碳源替代煤炭用作电弧炉炼钢过程中的渗碳剂和发泡剂对进一步降低电弧炉炼钢碳排放具有重大意义，而生物质资源作为唯一的可再生碳源将会是替代碳源的首选。本综述介绍了国内外各学者多年来对生物质在电弧炉炼钢中的应用的一系列研究，并在此基础上对未来国内电弧炉炼钢应用生物质的研究方向进行了展望。

关键词: 生物质, 电弧炉炼钢, 碳减排, 渗碳剂, 发泡剂

Abstract: In the current context of carbon peaking and carbon neutrality, the steel industry is under tremendous pressure to reduce carbon emissions in the long term, which is a major emitter of CO2. Therefore, developing electric arc furnace (EAF) steelmaking with lower carbon emissions will be an effective measure for the steel industry to achieve carbon emission reduction. However, although the carbon emission of EAF steelmaking is greatly lower than that of the traditional "Blast furnace-Converter" long-process steelmaking, it still needs to use a large number of coal resources to meet the smelting requirements. Therefore, using a suitable carbon source to replace coal as a carburizing and foaming agent in EAF steelmaking is of great significance to further reduce carbon emissions from EAF steelmaking. Biomass resources as the only renewable carbon source will be the first choice of alternative carbon sources. In this work, a series of studies on the application of biomass in EAF steelmaking conducted by domestic and international scholars had been introduced and the existing research results were also presented. On this basis, the future research direction of biomass application in domestic EAF steelmaking was prospected.

Key words: biomass, electric arc furnace steelmaking, carbon emission reduction, carburizing agent, foaming agent