欢迎访问过程工程学报, 今天是

›› 2011, Vol. 11 ›› Issue (4): 595-598.

• 反应与分离 • 上一篇    下一篇

钢水中有害元素砷的脱除

罗林根 王建军 孔辉 周俐   

  1. 安徽工业大学冶金与资源学院 安徽工业大学冶金与资源学院 安徽工业大学冶金与资源学院 安徽工业大学冶金与资源学院
  • 收稿日期:2011-07-27 修回日期:1900-01-01 出版日期:2011-08-20 发布日期:2011-08-20
  • 通讯作者: 王建军

Removal of Arsenic in Steel

LUO Lin-gen WANG Jian-jun KONG Hui ZHOU Li   

  1. School Metallurgy and Resources, Anhui University of Technology School of Metallurgy and Resource，Anhui University of Technology School of Metallurgy and Resource，Anhui University of Technology School of Metallurgy and Resource，Anhui University of Technology
  • Received:2011-07-27 Revised:1900-01-01 Online:2011-08-20 Published:2011-08-20
  • Contact: WANG Jian-jun

PDF

被引次数

8

摘要： 通过加入以Ca-Fe合金为基础的脱砷剂对钢水进行了一系列脱砷实验研究. 结果表明，随钢中O含量降低脱砷率逐渐升高，当钢中O含量为1.0695′10-4(w)时，脱砷率达到37.5%；脱砷率随Ca-Fe合金加入量增加而增大，当Ca-Fe合金加入量为试样质量的18%时，脱砷率达50%；钢中原始砷含量越高，脱砷率越大，当原始砷含量为8.00′10-4(w)时，脱砷率高达77.5%；Ca-Fe合金与添加剂共同作用更有利于砷的去除，脱砷率最高达到81%.

关键词: 脱砷, 氧含量, 钢水, 钙铁合金

Abstract: Dearsenication by adding Ca-Fe alloy-based arsenic removal agent in molten steel was studied. The effects of oxygen content in the steel, Ca-Fe alloy adding amount and initial arsenic content in the steel on the removal process were investigated. The results showed that the removal rate of arsenic increased with the oxygen content in the steel treated. When the oxygen content was 1.0695′10-4(w), the removal rate was 37.5%. The removal rate increased gradually with increasing of Ca-Fe alloy adding amount. When the dosage of Ca-Fe alloy was 18%(w), the removal rate was 50%. The higher the original arsenic content in the steel, the higher the removal rate. When the original arsenic content was 8.00′10-4, its removal rate reached up to 77.5%. When Ca-Fe alloy was added with additive together, their interaction was more conducive to dearsenication, the highest removal rate of arsenic reached up to 81%.

Key words: arsenic removal, oxygen content, molten steel, Ca-Fe alloy

中图分类号: