关键词: 液桥, 椭球形颗粒, 气液界面形状, Surface Evolver, 旋转

Abstract: Wet particulate matter widely exists in nature, production and daily life. Surface Evolver was used to investigate the shape of liquid bridge between two ellipsoidal wet particles placed vertically and parallel to each other during the relative rotation and the effects of contact angle, rotation angle, gravity and other parameters were analyzed. Under several different contact angles, the changes in the relative angle between the two particles from 0° to 90° were observed to analyze the changes in the gas-liquid surface area, solid-liquid contact area, and the shape of the contour line obtained by intersecting the plane passing through the center line of the two particles with the surface of the liquid bridge. The differences in the contour line shape of the liquid bridge under the same relative angle with and without gravity were compared. The results showed that the shape of the liquid bridge was a rotationally symmetric body. This body did not satisfy the arc assumption. The variation of the contact angle changed the shape of the liquid bridge. The changes in rotation angle and gravity caused the profile of the liquid bridge to change. Specifically, it changed from an elliptic curve to a hyperbola. The gravity caused the contact line on the upper and lower particles to shift. The rotation of the particles resulted in the reduction of the solid-liquid interface. The gas-liquid interface area of the liquid bridge was sinusoidally related to the relative angle of the particles. The minimum volume required to maintain the liquid bridge under gravity was investigated by gradually reducing the volume of the liquid bridge, and it was shown to be quadratically related to the contact angle and to increase with the increase in liquid density, with the minimum volume required to maintain the liquid bridge when the contact angle was about 90°.

Key words: liquid bridge, ellipsoidal particle, shape of gas-liquid interface, Surface Evolver, rotation