Welcome to visit The Chinese Journal of Process Engineering, Today is

›› 2011, Vol. 11 ›› Issue (5): 869-874.

• 材料工程专栏 • Previous Articles     Next Articles

Preparation of Sn-Si-C Composite as Li-ion Battery Anode Material by High Energy Ball Milling and Its Properties

LI Yan-hong LIU Yuan QIU Xin-ping   

  1. Key Laboratory of Organic Optoelectronics and Molecular Engineering, Department of Chemistry, Tsinghua University Key Laboratory of Organic Optoelectronics and Molecular Engineering, Department of Chemistry, Tsinghua University Key Laboratory of Organic Optoelectronics and Molecular Engineering, Department of Chemistry, Tsinghua University
  • Received:2011-07-29 Revised:2011-10-08 Online:2011-10-20 Published:2011-10-20
  • Contact: LI Yan-hong

Preparation of Sn-Si-C Composite as Li-ion Battery Anode Material by High Energy Ball Milling and Its Properties

李艳红 刘源 邱新平   

  1. 清华大学化学系有机光电子与分子工程教育部重点实验室 清华大学化学系有机光电子与分子工程教育部重点实验室 清华大学化学系有机光电子与分子工程教育部重点实验室
  • 通讯作者: 李艳红

PDF

Abstract: Electrochemically active Sn-Si-C composite was synthesized by high energy ball milling (HEBM) in Ar atmosphere. The so-obtained composite was characterized by X-ray diffraction and field emission scanning electron microscopy. Lithium insertion/extraction characteristics of the composites were examined by constant current charge-discharge and cyclic voltammetry methods. The results show that there is no new alloy generated by HEBM. The composite synthesized by two-step HEBM resulted in initial lithium insertion specific capacity as high as 1224 mA×h/g and higher reversible lithium extraction specific capacity of 855 mA×h/g.

Key words: Li-ion battery, anode, charging-discharging, electrochemical characterization

关键词: Li-ion battery, anode, charging-discharging, electrochemical characterization

CLC Number: