欢迎访问过程工程学报, 今天是

过程工程学报 ›› 2018, Vol. 18 ›› Issue (4): 839-844.DOI: 10.12034/j.issn.1009-606X.217364

• 材料工程 • 上一篇    下一篇

基于均匀设计优化制备静电纺丝相变储湿纤维

张 浩1,2*, 朱大有1, 刘秀玉1   

  1. 1. 安徽工业大学建筑工程学院,安徽马鞍山 243032
    2. 冶金减排与资源综合利用教育部重点实验室(安徽工业大学),安徽马鞍山 243002
  • 收稿日期:2017-10-18 修回日期:2018-01-03 出版日期:2018-08-22 发布日期:2018-08-15
  • 通讯作者: 张浩 fengxu19821018@163.com
  • 基金资助:
    中国博士后科学基金资助项目;冶金减排与资源综合利用教育部重点实验室(安徽工业大学)资助项目

Optimizing preparation of electrospun phase change and humidity storage fibers based on uniform design

Hao ZHANG1,2*, Dayou ZHU1, Xiuyu LIU1   

  1. 1. School of Civil Engineering and Architecture, Anhui University of Technology, Ma?anshan, Anhui 243032, China
    2. Key Laboratory of Metallurgical Emission Reduction and Resources Recycling (Anhui University of Technology), Ministry of
    Education, Ma’anshan, Anhui 243002, China
  • Received:2017-10-18 Revised:2018-01-03 Online:2018-08-22 Published:2018-08-15
  • Contact: ZHANG Hao fengxu19821018@163.com

摘要: 以醋酸纤维素为包裹材料、聚乙二醇800为相变材料、N,N-二甲基乙酰胺和丙酮为溶剂,采用静电纺丝法制备相变储湿纤维。基于均匀设计和多元非线性回归法研究了各因素对静电纺丝相变储湿纤维综合热-湿性能的影响。结果表明,各因素对性能影响的主次顺序为:聚乙二醇800用量>N,N-二甲基乙酰胺用量>醋酸纤维素用量>反应温度>干燥温度;优化制备方案:N,N-二甲基乙酰胺用量为11.3 g、醋酸纤维素用量为6.96 g、聚乙二醇800用量为8.12 g、反应温度为37.8 ℃、干燥温度为60.4 ℃.

关键词: 静电纺丝, 相变储湿纤维, 均匀设计, 热性能, 湿性能, 优化制备

Abstract: Phase change and humidity storage fibers was prepared with cellulose acetate as coating materials, polyethylene glycol 800 as phase change materials, N,N-dimethylacetamide and acetone as solvent by electrospinning method. The effects of every factor on comprehensive thermal and humidity properties of electrospun phase change and humidity storage fibers were studied based on uniform design and multivariate nonlinear regression. The results showed that primary and secondary sequence of factors on comprehensive thermal and humidity properties were content of polyethylene glycol 800?content of N,N-dimethylacetamide?content of cellulose acetate?reaction temperature?drying temperature. The optimization program were mass ratios of N,N-dimethylacetamide to acetone of 0.226, cellulose acetate to acetone of 0.1392 and polyethylene glycol 800 to acetone of 0.1624, reaction temperature 37.8℃ and drying temperature 60.4℃.

Key words: electrospinning, phase change and humidity storage fibers, uniform design, thermal property, humidity property, optimized preparation