组合螺带桨搅拌槽内粉体的混合性能

doi:10.12034/j.issn.1009-606X.217232

过程工程学报 ›› 2018, Vol. 18 ›› Issue (1): 63-68.DOI: 10.12034/j.issn.1009-606X.217232

组合螺带桨搅拌槽内粉体的混合性能

刘峻溪，高正明，马博学，包雨云，蔡子琦^*

北京化工大学化学工程学院，北京 100029

收稿日期:2017-05-09 修回日期:2017-06-07 出版日期:2018-02-22 发布日期:2018-01-29
通讯作者: 蔡子琦 caiziqi@mail.buct.edu.cn

Powder Mixing Performance in Stirred Tanks with Combined Agitators

Junxi LIU, Zhengming GAO, Boxue MA, Yuyun BAO, Ziqi CAI^*

College of Chemical Engineering, Beijing University of Chemical Technology, Beijing 100029, China

Received:2017-05-09 Revised:2017-06-07 Online:2018-02-22 Published:2018-01-29

摘要/Abstract

摘要： 在直径0.48 m的立式搅拌槽内研究了4种组合式螺带搅拌桨的粉体混合性能，考察了搅拌转速、粉体物料装填高度和搅拌桨型对粉体混合性能的影响，分析了径向与轴向上的粉体混合情况. 结果表明，搅拌转速是影响粉体混合的重要因素，增加搅拌转速能明显缩短混合时间，转速44.0 r/min时的混合因子π3比转速8.7及26.5 r/min时下降50%及30%以上；在搅拌桨内部附加较小的内桨使功率略有增加，但可显著缩短混合时间，转速44.0 r/min时能使π3下降50%，提高混合效率.

关键词: 螺带桨, 粉体, 混合性能, 实验研究

Abstract: Four different helical ribbon impeller combinations were used to study the powder mixing in a stirred tank with diameter of 0.48 m. The effects of rotation speed, powder filling level, impeller combination on the mixing performance, and the powder mixing performance at the axial and radial cross were investigated. The results showed that the rotational speed was the important factor of effect the powder mixing. The mixing factor π3 at rotational speed of 44 r/min fell by 30% and 50% than the speed was 26.5 and 8.7 r/min. The extra small impeller installed inside the big impeller could increase the power consumption, but significantly reduce the mixing factor π3 50% at the rotation speed of 44 r/min, enhanced the mixing performance.

Key words: Helical ribbon, powder, mixing performance, experimental research

刘峻溪高正明马博学包雨云蔡子琦. 组合螺带桨搅拌槽内粉体的混合性能[J]. 过程工程学报, 2018, 18(1): 63-68.

Junxi LIU Zhengming GAO Boxue MA Yuyun BAO Ziqi CAI. Powder Mixing Performance in Stirred Tanks with Combined Agitators[J]. Chin. J. Process Eng., 2018, 18(1): 63-68.

参考文献

[1] Wiilliams. J. C.The mixing of dry powders[J].Powder Technology, 1968, Vol2(1):13-20 [2] Simons T A H, Bensmann S, Zigan S, et al.Characterization of granular mixing in a helical ribbon blade blender[J].Powder Technology, 2015, (293):15-25 [3]Cooker B, Nedderman R M.Circulation and power consumption in helical ribbon powder agitators[J].Powder technology, 1987, 52(2):117-129 [4]Cooker B, Nedderman R M.A theory of the mechanics of the helical ribbon powder agitator[J].Powder technology, 1987, 50(1):1-13 [5]Cooker B, Nedderman R M.Mixing in a helical ribbon powder agitator[J].Powder Technology, 1986, 46(s 2–3):263-269 [6]Robinson M, Cleary P.Flow and mixing performance in helical ribbon mixers[J].Chemical Engineering Science, 2012, 84:382-398 [7]J.Bridgewater, B.F.C. Laurent, D.J. Parker.Motion in a single Bed agitated by a single blade[J].AICHE J., 2000, 46:1723-1734 [8]Bridgwater J, Broadbent C J, Parker D J.Study of the influence of blade speed on the performance of a powder mixer using positron emission particle tracking[J].Chemical Engineering Research & Design, 1993, 71(A6):675-681 [9]Masiuk S.Power consumption,mixing time and attrition action for solid mixing in a ribbon mixer[J].Powder Technology, 1987, 51(3):217-229 [10]Sudah O S, Coffin-Beach D, Muzzio F J.Effects of blender rotational speed and discharge on the homogeneity of cohesive and free-flowing mixtures[J].International Journal of Pharmaceutics, 2002, 247(1-2):57- [11]German R M.Powder metallurgy science[J].Randall M. German, , :- [12]陈文革, 罗启文, 任慧.粉体混合均匀性定举评估模型的建立与研究[J].中国粉体技术, 2008, 14(3):5-19 [13]Muzzio F J, Llusa M, Goodridge C L, et al.Evaluating the mixing performance of a ribbon blender[J].Powder Technology, 2008, 186(3):247-254 [14] Zlokarnik M.Stirring theory and practice [R]. Wiley-VCH Verlag GmbH, Weinheim, Germany.2001

[1]	程耀华边慧光汪传生蔡宁. 一种新型3D打印成型-脱脂-烧结工艺[J]. 过程工程学报, 2020, 20(6): 687-694.
[2]	刘培启高础涵李想于洋胡大鹏. 高温口压力影响气波振荡管制冷性能机理分析[J]. 过程工程学报, 2020, 20(1): 12-19.
[3]	赵亮焦娟娟王鹏朱晓静邱庆刚沈胜强. 空心喷嘴喷淋特性实验研究[J]. 过程工程学报, 2019, 19(6): 1085-1092.
[4]	权峰项厚政杨磊吴其辉冒爱琴俞海云. 高熵合金粉体制备及应用研究进展[J]. 过程工程学报, 2019, 19(3): 447-455.
[5]	袁方利金化成侯果林白柳杨丁飞李保强陈运法. 高频热等离子体制备特种粉体研究进展[J]. 过程工程学报, 2018, 18(6): 1138-1144.
[6]	郑思佳罗敏别沁刘颖敬加强. 采气管线浮动式球阀迎流面的冲蚀进化特性[J]. 过程工程学报, 2018, 18(5): 942-950.
[7]	曹伟孙淑英宋兴福于建国. 含锂脱附液制备碳酸锂[J]. 过程工程学报, 2016, 16(3): 424-430.
[8]	赵金花王宇松陈武华赖飞. 吗啉离子液体中纳米TiO2的制备及其光催化性能[J]. , 2015, 15(1): 159-163.
[9]	黄娟鲍杰戴干策. 螺带型搅拌槽内异物性液体的混合性能[J]. , 2013, 13(4): 548-554.
[10]	黄娟鲍杰戴干策. 螺带型叶轮搅拌槽内流场分析与计算[J]. , 2010, 10(5): 833-841.
[11]	李国智邓海燕马艳梅张振千. 大型快速流化床内颗粒浓度和速度分布的实验研究[J]. , 2009, 9(6): 1041-1047.
[12]	宋永臣阮徐可梁海峰李清平赵越超. 天然气水合物热开采技术研究进展[J]. , 2009, 9(5): 1035-1040.
[13]	黄凌云;朱国才;池汝安;赵玉娜. 利用酸性CuCl2蚀刻废液制备微米级Cu2O粉体[J]. , 2008, 8(1): 88-92.
[14]	吴九岭;李增喜;张伟刚. 镍/石墨复合粉体及其热喷涂涂层新材料[J]. , 2007, 7(6): 1221-1228.
[15]	王国联;王洁欣;沈志刚;郭奋;陈建峰;Jimmy Yun. 反应沉淀法制备阿奇霉素药物超微粉体[J]. , 2007, 7(4): 802-806.

组合螺带桨搅拌槽内粉体的混合性能

Powder Mixing Performance in Stirred Tanks with Combined Agitators

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics