Abstract: Macroporous poly(styrene-glycidyl methacrylate) microspheres [P(ST-GMA)] were prepared using surfactant reverse micelle swelling method. The effects of GMA content, surfactant amount, diluents, and crosslinking agent amount on the pore distribution in microspheres were investigated. The results showed that the pore sizes of microspheres were remarkably increased with increasing of content of GMA. When the surfactant amount was added from 1.6 g to 2.0 g, the pore sizes were correspondingly increased from 100 to 720 nm. Further more, the pore sizes were positively related to the hydrophobicity of diluents. In addition, with the crosslinking agent amount was increased from 1.0 g to 2.0 g, the pore sizes were significantly decreased from 550 to 100 nm. Under the optimization conditions, macroporous P(ST-GMA) microspheres with special pore sizes and different contents of GMA were synthesized. The obtained macroporous microspheres can be used to link various ligands and applied as chromatographic media, or be directly used to immobilize enzymes.

Key words: surfactant reverse micelles, macroporous poly(styrene-glycidyl methacrylate) microspheres, pore structure

摘要： 使用表面活性剂反胶团法制备超大孔聚(苯乙烯-甲基丙烯酸缩水甘油酯)[P(ST-GMA)]共聚微球，考察了功能单体GMA含量、油溶性表面活性剂、稀释剂、交联剂对微球孔径的影响. 结果表明，随GMA含量增加，微球孔径显著增大；表面活性剂用量从1.6 g增加到2.0 g时，微球孔径由100 nm增加到720 nm；随稀释剂疏水性增强，微球孔径增大；交联剂用量由1.0 g增加到2.0 g，微球孔径由550 nm变为100 nm左右. 在此基础上，通过条件优化合成了具有特定孔径的不同功能单体GMA含量的超大孔P(ST-GMA)共聚微球，可连接不同配基，用于色谱分离介质及酶的固定化.

关键词: 表面活性剂反胶团, 超大孔共聚微球, 孔结构